I always started out “Imma hide all these cables and make the insides perfect!”
By the time I’d run all the power, fan, IDE, front case, USB, etc. I was like fuckit, I just want to get this thing running. Half-assed jammed the cables out of the way or behind the case ITX backing. Looks like shit, put the case side back on, off I go.
Lots easier now with far fewer cables to be run, cases offer more space behind the mobo for hiding cables and not the 3/4” of space they used to offer.
Lots easier now with far fewer cables to be run, cases offer more space behind the mobo for hiding cables and not the 3/4” of space they used to offer.
That’s why I only use cube cases nowadays. Just shove all cables into the back and you’re done.
It was incredibly difficult to create a clean build back in the day with non-modular PSU, molex power cables, and IDE connection cables. These days it’s pretty simple, even if the back looks like trash. That’s what the back cover is for.
Well, the important thing is that the cables aren’t impeding the flow of air around the parts that get hot. It doesn’t look like they are, so I don’t see a problem.
The only thing that matters is that the cables don’t get caught up in any fans. Other than that you can stuff as many cables in a PC case as you want and it won’t impact temperatures by much (maybe 1 or 2 degrees Celsius). JayzTwoCents made a video about that. Cables don’t really impact air flow.
A case with actual drive bays and ribbon cables everywhere, it if wasn’t for that AMD Wraith cooler I’d think I was looking at a machine from 20 years ago.
Doesn’t look like there is any other side at all which is fairly common in older cases (and possibly new pre built).
The metal plate you see is probably the side panel.
I guess they could probably fit some small cables between the motherboard standoffs but that’s about it.
Guessing that this is a somewhat older case, the power supply being at the top like that it’s pretty close to the motherboard and CPU power sockets and the drive bays, and GPUs could often run from motherboard power. You might have those huge grey IDE ribbon cables for floppy drives, you usually had the ketchup and mustard power wires, who cares what the thing looked like inside?
i always just hang shit somewhere it won’t impede airflow and let it be. the ONE time i bought a prebuilt system was the only time i’ve had a computer with the cables remotely “managed”.
unfortunately one of the zip ties they used impeded the fan on the cpu cooler, but only when the case was closed. it made this buzzing noise that i couldn’t track down for months, and then the motherboard failed. and then the replacement motherboard failed.
i went back to building my own computers again after that.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: [email protected]
No game suggestions, friend requests, surveys, or begging.
No Let’s Plays, streams, highlight reels/montages, random videos or shorts.
No off-topic posts/comments, within reason.
Use the original source, no clickbait titles, no duplicates.
(Submissions should be from the original source if possible, unless from paywalled or non-english sources.
If the title is clickbait or lacks context you may lightly edit the title.)
I always started out “Imma hide all these cables and make the insides perfect!”
By the time I’d run all the power, fan, IDE, front case, USB, etc. I was like fuckit, I just want to get this thing running. Half-assed jammed the cables out of the way or behind the case ITX backing. Looks like shit, put the case side back on, off I go.
Lots easier now with far fewer cables to be run, cases offer more space behind the mobo for hiding cables and not the 3/4” of space they used to offer.
That’s why I only use cube cases nowadays. Just shove all cables into the back and you’re done.
It was incredibly difficult to create a clean build back in the day with non-modular PSU, molex power cables, and IDE connection cables. These days it’s pretty simple, even if the back looks like trash. That’s what the back cover is for.
How is the Intel arc treating you op? Is it actually good for general purpose nowadays, or still a lot in beta phase?
I love PC parts branded “sparkle”. I had a Sparkle power supply and I just hoped I would never see a magic blue sparkle.
I feel so seen.
If no side window, who cares, let it be messy! Call it your sleeper office PC.
I have a side window, and still don’t give a fuck about cable management. Pc lives under a desk, dust be damned!
Well, the important thing is that the cables aren’t impeding the flow of air around the parts that get hot. It doesn’t look like they are, so I don’t see a problem.
The only thing that matters is that the cables don’t get caught up in any fans. Other than that you can stuff as many cables in a PC case as you want and it won’t impact temperatures by much (maybe 1 or 2 degrees Celsius). JayzTwoCents made a video about that. Cables don’t really impact air flow.
I don’t see a problem here.
PS: My opinion on PC innards was formed during the reign of IDE cables.
Mmmmmmmm… ketchup and mustard 🤤
-deleted-
As long as you can close the case, and the cables don’t get caught in the fans, it’s perfect inside.
i can tell because is not all proprietary
Feels
Ah, my old WoW gaming computer!
Right age. It’s my 2010 gaming rig turned server.
If it works, good. That is what matters. Just remember to clean it every once in a while. I’ve seen fully dust and lint clogged heatsinks before.
How did you get access to my pc???
Wi-fi connection.
That is one hell of a wifi connection, lol
You’re paying (theoretically!) for it, so you should know on what you’re spending your money.
How’s the Intel GPU treating ya? Looks awesome!
Honestly I can’t. Looks like those from the store.
A case with actual drive bays and ribbon cables everywhere, it if wasn’t for that AMD Wraith cooler I’d think I was looking at a machine from 20 years ago.
And absolutely no way to route cables in the back.
You mean no room at all under the other side panel and/or the other side panel doesn’t come off, it’s all riveted together? Yeah.
Doesn’t look like there is any other side at all which is fairly common in older cases (and possibly new pre built). The metal plate you see is probably the side panel.
I guess they could probably fit some small cables between the motherboard standoffs but that’s about it.
there are two sheets of steel there, one that the motherboard and such mount to with all the screw holes and such, and the smooth outer skin.
I doubt there is any room to route cables there though. Doesn’t look like it anyways.
No, wasn’t intended to.
Guessing that this is a somewhat older case, the power supply being at the top like that it’s pretty close to the motherboard and CPU power sockets and the drive bays, and GPUs could often run from motherboard power. You might have those huge grey IDE ribbon cables for floppy drives, you usually had the ketchup and mustard power wires, who cares what the thing looked like inside?
i always just hang shit somewhere it won’t impede airflow and let it be. the ONE time i bought a prebuilt system was the only time i’ve had a computer with the cables remotely “managed”.
unfortunately one of the zip ties they used impeded the fan on the cpu cooler, but only when the case was closed. it made this buzzing noise that i couldn’t track down for months, and then the motherboard failed. and then the replacement motherboard failed.
i went back to building my own computers again after that.