I’m not an expert on this by any means, but I think the issue is they would have to work out how to encode the audio for surround themselves, and then it would be up to all of the different AV receivers out there to decode it properly. Using Dolby just standardizes it to where if your receiver supports that format you know it’ll decode it properly.
Yes there are other formats such as DTS and Auro 3D. You can even do it with straight up LPCM if you want, but DD is one of the quickest ways to do it and iirc DTS has similar licensing requirements with their logo, and barely anyone has Auro. You could try to use LPCM but you’d need a multichannel output such as 6x analog connections or a digital source using bitstreamed output which many didn’t have at the time.
Longer answer, no.
This was a GameCube game. It only supports stereo output. It would have needed Dolby Surround/Pro Logic II libraries to do surround sound encoding within the stereo signal. The use would have also needed a receiver with Pro Logic II support and surround speakers.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: [email protected]
Welcome to the largest gaming community on Lemmy! Discussion for all kinds of games. Video games, tabletop games, card games etc.
Can’t you add surround without dolby?
I’m not an expert on this by any means, but I think the issue is they would have to work out how to encode the audio for surround themselves, and then it would be up to all of the different AV receivers out there to decode it properly. Using Dolby just standardizes it to where if your receiver supports that format you know it’ll decode it properly.
Yes there are other formats such as DTS and Auro 3D. You can even do it with straight up LPCM if you want, but DD is one of the quickest ways to do it and iirc DTS has similar licensing requirements with their logo, and barely anyone has Auro. You could try to use LPCM but you’d need a multichannel output such as 6x analog connections or a digital source using bitstreamed output which many didn’t have at the time.
As far as I’m aware, yes.
I use Dolby with a lot of my games but don’t have the 'Ad screen".
You might have to due to licensing, if the technology is patented. I don’t know about this
Short answer, Yes.
Longer answer, no. This was a GameCube game. It only supports stereo output. It would have needed Dolby Surround/Pro Logic II libraries to do surround sound encoding within the stereo signal. The use would have also needed a receiver with Pro Logic II support and surround speakers.