A set of 3D-printed headphones, alongside a DAC/amp/EQ board powered by a Raspberry Pico. - GitHub - ploopyco/headphones: A set of 3D-printed headphones, alongside a DAC/amp/EQ board powered by a R...
In the book it’s a word the little brother came up with, and if anyone said it to them they’d cry. Their mom banned it so in their house it was on the same level as swearing.
This looks really cool. Let’s say I want to get into this. I have no idea about 3d printing, PCB boars or low level programming. I’m a software developer. Where do I start to learn all this? Which part do I take on first?
If you’re new to 3D printing, this is not a good first project. Buy the kit from them. It will be cheaper to do that then to buy each necessary component in bulk and make everything from scratch.
This has a lot of tight tolerances and lots of little things that have to go just right. Start with simple projects like brackets for things or raspberry pi enclosures. Look at printables.com or one of the other sites for inspiration.
actually at the moment they just recommend you buy it from them and assemble it at home, if a part breaks you can then 3d print it. you cant 3d print every part though (e.g. usb c port)
everything from rearranging the keys (for instance I use vim, so I swap esc and capslock), to changing tap and hold behaviors (my capslock key does esc on tap and ctrl on hold), to really elaborate stuff like tap dances (https://thomasbaart.nl/2018/12/13/qmk-basics-tap-dance/), all while being configured directly on the firmware of the keyboard, so it just works no matter what computer it’s plugged into, and it doesn’t have any weirdness that comes with software remapping tools.
I have a pair. They’re really cool, but I haven’t found a use case for them. They’re open-back, so I can’t use them when I’m working in public spaces. They require their own USB DAC/AMP, so I can’t use them in my analog chain at either my desktop or home theater. And the DAC/AMP requires too much power to use them with my phone, so I can’t use them while walking around. The only time I use them is when I’m working from home and for some reason I want to use my laptop in bed or in the living room instead of my desktop, which is rare.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: [email protected]
This is the official technology community of Lemmy.ml for all news related to creation and use of technology, and to facilitate civil, meaningful discussion around it.
Ask in DM before posting product reviews or ads. All such posts otherwise are subject to removal.
Rules:
1: All Lemmy rules apply
2: Do not post low effort posts
3: NEVER post naziped*gore stuff
4: Always post article URLs or their archived version URLs as sources, NOT screenshots. Help the blind users.
5: personal rants of Big Tech CEOs like Elon Musk are unwelcome (does not include posts about their companies affecting wide range of people)
6: no advertisement posts unless verified as legitimate and non-exploitative/non-consumerist
7: crypto related posts, unless essential, are disallowed
Why did they use such an obscene word for this?
“Ploopy”? I would say it’s weird (for headphones) and maybe non-descriptive. How is it “obscene”?
Someone didn’t read diary of a wimpy kid
That’s true. But I guess I’m not the only one haha!
Not the only one; I’m wondering, too
In the book it’s a word the little brother came up with, and if anyone said it to them they’d cry. Their mom banned it so in their house it was on the same level as swearing.
It’s far easier to search for and find things with unique names, especially if one name will unite a family of things.
This looks really cool. Let’s say I want to get into this. I have no idea about 3d printing, PCB boars or low level programming. I’m a software developer. Where do I start to learn all this? Which part do I take on first?
If you’re new to 3D printing, this is not a good first project. Buy the kit from them. It will be cheaper to do that then to buy each necessary component in bulk and make everything from scratch.
What is a good project to start 3d printing? And why this one isn’t?
This has a lot of tight tolerances and lots of little things that have to go just right. Start with simple projects like brackets for things or raspberry pi enclosures. Look at printables.com or one of the other sites for inspiration.
Great page, thanks.
actually at the moment they just recommend you buy it from them and assemble it at home, if a part breaks you can then 3d print it. you cant 3d print every part though (e.g. usb c port)
Bit expensive… Still, if I want to get in it, where do I start?
I guess 3D printing is an easy start these days. Look into the 3d printing community here for guidance
A coworker has a pair of these and it’s pretty neat.
I have a ploopy mouse and it’s utterly fantastic.
So many buttons and has QMK firmware so I have actual layers on my mouse!
QMK?
Very configurable Open Source Keyboard (and mouse I guess) firmware
configutable how?
everything from rearranging the keys (for instance I use vim, so I swap esc and capslock), to changing tap and hold behaviors (my capslock key does esc on tap and ctrl on hold), to really elaborate stuff like tap dances (https://thomasbaart.nl/2018/12/13/qmk-basics-tap-dance/), all while being configured directly on the firmware of the keyboard, so it just works no matter what computer it’s plugged into, and it doesn’t have any weirdness that comes with software remapping tools.
This is the future
I have a pair, and they sound great! I do have some issues with the connection into the amp though, I think I’ve been to hard on the wire.
I have a pair. They’re really cool, but I haven’t found a use case for them. They’re open-back, so I can’t use them when I’m working in public spaces. They require their own USB DAC/AMP, so I can’t use them in my analog chain at either my desktop or home theater. And the DAC/AMP requires too much power to use them with my phone, so I can’t use them while walking around. The only time I use them is when I’m working from home and for some reason I want to use my laptop in bed or in the living room instead of my desktop, which is rare.