Look at that new stick!
The original thumbstick of the Steam Controller was always a bit imperfect. I bought my Steam Controller on day one, but a few years in, the soft-touch material on the stick started to flake off. That’s gross!
Those flakes that rub off also don’t help with gripping the stick. It already has a convex-shaped top, which I like less than a concave top. It always feels like I’m pushing the stick in some direction but my thumb is slowly slipping.
After almost a decade of putting up with this, I had enough. I looked around online and found that people had figured out how to upgrade that part of the Steam Controller, and it’s actually decently easy and cheap.
It turns out the replacement sticks for the 8BitDo SN30 Pro fit perfectly in the Steam Controller!
The Steam Controller is held together with Torx T6 screws. I opened it up and carefully lifted up the mainboard, making sure not to harm the ribbon cable underneath. From there, I pulled the stock thumbstick cap off of the stick and slipped on the replacement one.
I now have a Steam Controller with a thumbstick that doesn’t rub off and is even concave for better grip!
Welcome to the largest gaming community on Lemmy! Discussion for all kinds of games. Video games, tabletop games, card games etc.
Video games, tabletop, or otherwise. Posts not related to games will be deleted.
This community is focused on games, of all kinds. Any news item or discussion should be related to gaming in some way.
No bigotry, hardline stance. Try not to get too heated when entering into a discussion or debate.
We are here to talk and discuss about one of our passions, not fight or be exposed to hate. Posts or responses that are hateful will be deleted to keep the atmosphere good. If repeatedly violated, not only will the comment be deleted but a ban will be handed out as well. We judge each case individually.
Try to keep it to 10% self-promotion / 90% other stuff in your post history.
This is to prevent people from posting for the sole purpose of promoting their own website or social media account.
This community is mostly for discussion and news. Remember to search for the thing you’re submitting before posting to see if it’s already been posted.
We want to keep the quality of posts high. Therefore, memes, funny videos, low-effort posts and reposts are not allowed. We prohibit giveaways because we cannot be sure that the person holding the giveaway will actually do what they promise.
Make sure to mark your stuff or it may be removed.
No one wants to be spoiled. Therefore, always mark spoilers. Similarly mark NSFW, in case anyone is browsing in a public space or at work.
Don’t share it here, there are other places to find it. Discussion of piracy is fine.
We don’t want us moderators or the admins of lemmy.world to get in trouble for linking to piracy. Therefore, any link to piracy will be removed. Discussion of it is of course allowed.
PM a mod to add your own
Video games
Generic
Help and suggestions
I’m not sure I’d consider this a total upgrade - I have a Steam Controller and an 8bitdo SN30 Pro, and despite the 8bitdo one being newer and having been used much less, I wore through its original thumbstick rubber and had to replace it much sooner than the Steam Controller’s thumbstick cap, which hasn’t even worn through, it was just flaking.
Either that was a fluke, or the 8bitdo rubber isn’t as durable.
Chiming in as a steam controller die hard, and sn30pro master-race. My replacement stick for steam controller from 8bitdo still turned into flakes in a few months. My sn30pros are going strong though, may be a batch to batch situation for rubber materials.
Good thing I ordered two thumbstick caps!
I haven’t had any noticeable joystick wear on my four Pro 2’s since launch date April 2021. I’m using them evenly however, so that might skew things. I swap to the next every time the battery needs recharging.
Weekly couch gaming sessions with my friends is why I have four.