True, but don’t forget the K6-2 and how they screwed up the paths so when it heated up it’d short itself out. Coupled with the lack of a thermal regulator and you could turn an AMD into a pile of silicon.
I think you’re thinking of the Socket A Athlon/Duron/Sempron. A lot of coolers used shitty mounting designs so it was possible to get it off alignment or over-pressure it and crack the die, and no heatspreader + poor thermal controls allowed for a meltdown if the mountng was bad.
The K6-2 was pretty solid aside from not quite holding performance crowns.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: [email protected]
No game suggestions, friend requests, surveys, or begging.
No Let’s Plays, streams, highlight reels/montages, random videos or shorts.
No off-topic posts/comments, within reason.
Use the original source, no clickbait titles, no duplicates.
(Submissions should be from the original source if possible, unless from paywalled or non-english sources.
If the title is clickbait or lacks context you may lightly edit the title.)
True, but don’t forget the K6-2 and how they screwed up the paths so when it heated up it’d short itself out. Coupled with the lack of a thermal regulator and you could turn an AMD into a pile of silicon.
I think you’re thinking of the Socket A Athlon/Duron/Sempron. A lot of coolers used shitty mounting designs so it was possible to get it off alignment or over-pressure it and crack the die, and no heatspreader + poor thermal controls allowed for a meltdown if the mountng was bad.
The K6-2 was pretty solid aside from not quite holding performance crowns.