So I like to use Xbox controllers (doesn’t matter if it’s first- or third-party)
because I like the layout, it’s just comfortable to me. However I’ve noticed
that on all my controllers in the past few years, the left thumb stick will
start to “give out” over the course of a couple months. For instance I’ll be
pushing it forward all the way, but it won’t register for some reason and my
character will only move a little bit. Sometimes wiggling it a bit will fix it,
sometimes it doesn’t. And it’s not like I’m squeezing the hell out of the
controller or mashing the stick constantly; in fact it’s made me try to be more
delicate with my controllers, even though I’m just playing the games normally.
Is it just how controllers are, or am I just getting the shit end of the stick?
So I like to use Xbox controllers (doesn’t matter if it’s first- or third-party) because I like the layout, it’s just comfortable to me. However I’ve noticed that on all my controllers in the past few years, the left thumb stick will start to “give out” over the course of a couple months. For instance I’ll be pushing it forward all the way, but it won’t register for some reason and my character will only move a little bit. Sometimes wiggling it a bit will fix it, sometimes it doesn’t.
And it’s not like I’m squeezing the hell out of the controller or mashing the stick constantly; in fact it’s made me try to be more delicate with my controllers, even though I’m just playing the games normally.
Is it just how controllers are, or am I just getting the shit end of the stick?
That is kind of just how non hall effect thumb sticks are. But I’ve had great luck with Deoxit D5. You have to take apart the controller so you can squirt it directly into the switch itself but as long as it’s not a mechanical problem like a weak spring, the Deoxit usually gets it working like new.
Even some isopropyl alcohol works. My controller was drifting and I took it apart to blow it out and give it a good cleaning with alcohol. Works flawlessly now.
It’s one of the messier options but it still works well. The switches in my logitech g604 have been bounce free for over a year now after hosing then down with WD-40. That’s longer than any of the warranty replacement mice lasted.
Deoxit leaves a residue, too, that will stain clothes. That residue is what helps the contacts from oxidizing again in the future.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: [email protected]
Welcome to the largest gaming community on Lemmy! Discussion for all kinds of games. Video games, tabletop games, card games etc.
That is kind of just how non hall effect thumb sticks are. But I’ve had great luck with Deoxit D5. You have to take apart the controller so you can squirt it directly into the switch itself but as long as it’s not a mechanical problem like a weak spring, the Deoxit usually gets it working like new.
Even some isopropyl alcohol works. My controller was drifting and I took it apart to blow it out and give it a good cleaning with alcohol. Works flawlessly now.
Yeah alcohol works well. WD-40. too.
WD-40 leaves residue, it is not suitable for cleaning
It’s one of the messier options but it still works well. The switches in my logitech g604 have been bounce free for over a year now after hosing then down with WD-40. That’s longer than any of the warranty replacement mice lasted.
Deoxit leaves a residue, too, that will stain clothes. That residue is what helps the contacts from oxidizing again in the future.
Was it an Xbox controller or a ps5 controller?
Xbox. I can’t stand the controller stick layout of PS controllers.