Polling rate is a hit of a bummer, but then again the Xbox Elite controllers I’ve been using have a lower polling rate and I haven’t really noticed - probably because I’d never use a controller for anything competitive.
Looking forward to clicky switch upgrade kits, love the ones I have for Steam Deck :)
With regards to the polling rate, I wouldnt worry about it. Gaming Nexus did a deep dive into the latency of the controller, and it is really good. Which is going to be signicicantly more important that the minute difference you would get from increasing polling rate over 250hz.
I’ll watch this when I get a chance, but I’m wondering if the puck actually polls at 1000 Hz but splits it up to 250 Hz per controller. That would be one way to design it for 4 controllers with common industry parts.
EDIT: Watched. GN didn’t check this or even speculate, but the measured latency was excellent with the wireless puck.
A polling rate of 250Hz means that the average latency added due to polling is 2ms. A polling rate of 1000Hz would mean an average of 0.5ms added latency.
Even on a 240Hz screen, the extra latency caused by the polling rate will most likely not amount to even 1 frame of extra delay compared to what you’d get with a polling rate of 1000Hz.
Bluetooth latency is likely going to be one order of magnitude greater than that. I wouldn’t worry about polling rate honestly.
With the trackpads it kinda changes things, I have the og Steam Controller and it polls at 125Hz which is noticeably sluggish on a 240Hz screen. The same might apply here for people using even higher refresh rates (360Hz and 240/480Hz dual mode are getting pretty common), though not nearly to the same extent. Just something to keep in mind.
Oh okay ! I didn’t even consider third party brands, it seems interesting but as far as I have seen third party controllers never support all of the first party features, do they ?
Also, gyro is a must have, and afaik the new steam controller will have the highest poll rate gyro ever if it’s 250Hz
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: [email protected]
Welcome to the largest gaming community on Lemmy! Discussion for all kinds of games. Video games, tabletop games, card games etc.
Rules
1. Submissions have to be related to games
Video games, tabletop, or otherwise. Posts not related to games will be deleted.
This community is focused on games, of all kinds. Any news item or discussion should be related to gaming in some way.
2. No bigotry or harassment, be civil
No bigotry, hardline stance. Try not to get too heated when entering into a discussion or debate.
We are here to talk and discuss about one of our passions, not fight or be exposed to hate. Posts or responses that are hateful will be deleted to keep the atmosphere good. If repeatedly violated, not only will the comment be deleted but a ban will be handed out as well. We judge each case individually.
3. No excessive self-promotion
Try to keep it to 10% self-promotion / 90% other stuff in your post history.
This is to prevent people from posting for the sole purpose of promoting their own website or social media account.
4. Stay on-topic; no memes, funny videos, giveaways, reposts, or low-effort posts
This community is mostly for discussion and news. Remember to search for the thing you’re submitting before posting to see if it’s already been posted.
We want to keep the quality of posts high. Therefore, memes, funny videos, low-effort posts and reposts are not allowed. We prohibit giveaways because we cannot be sure that the person holding the giveaway will actually do what they promise.
5. Mark Spoilers and NSFW
Make sure to mark your stuff or it may be removed.
No one wants to be spoiled. Therefore, always mark spoilers. Similarly mark NSFW, in case anyone is browsing in a public space or at work.
6. No linking to piracy
Don’t share it here, there are other places to find it. Discussion of piracy is fine.
We don’t want us moderators or the admins of lemmy.world to get in trouble for linking to piracy. Therefore, any link to piracy will be removed. Discussion of it is of course allowed.
Polling rate is a hit of a bummer, but then again the Xbox Elite controllers I’ve been using have a lower polling rate and I haven’t really noticed - probably because I’d never use a controller for anything competitive.
Looking forward to clicky switch upgrade kits, love the ones I have for Steam Deck :)
With regards to the polling rate, I wouldnt worry about it. Gaming Nexus did a deep dive into the latency of the controller, and it is really good. Which is going to be signicicantly more important that the minute difference you would get from increasing polling rate over 250hz.
https://youtu.be/wfr4QN1Hvhs?t=494
I’ll watch this when I get a chance, but I’m wondering if the puck actually polls at 1000 Hz but splits it up to 250 Hz per controller. That would be one way to design it for 4 controllers with common industry parts.
EDIT: Watched. GN didn’t check this or even speculate, but the measured latency was excellent with the wireless puck.
A polling rate of 250Hz means that the average latency added due to polling is 2ms. A polling rate of 1000Hz would mean an average of 0.5ms added latency.
Even on a 240Hz screen, the extra latency caused by the polling rate will most likely not amount to even 1 frame of extra delay compared to what you’d get with a polling rate of 1000Hz.
Bluetooth latency is likely going to be one order of magnitude greater than that. I wouldn’t worry about polling rate honestly.
With the trackpads it kinda changes things, I have the og Steam Controller and it polls at 125Hz which is noticeably sluggish on a 240Hz screen. The same might apply here for people using even higher refresh rates (360Hz and 240/480Hz dual mode are getting pretty common), though not nearly to the same extent. Just something to keep in mind.
Are there even any controllers with a higher polling rate, though ?
8BitDo Ultimate 2 Controller lineup is at 1000hz
Gamesir G7 Pro 8k and Razer Wolverine V3 go up to 8000hz
Checked GameSir and it says their WIRED controllers are 8000 Hz. That’s cool I guess but wired + gyro is incredibly annoying to use, so not for me.
Oh okay ! I didn’t even consider third party brands, it seems interesting but as far as I have seen third party controllers never support all of the first party features, do they ?
Also, gyro is a must have, and afaik the new steam controller will have the highest poll rate gyro ever if it’s 250Hz