I been reading and things are confusing for me. Some say that I only need 2 wires to run across the motherboard and run ABadAvatar. But if I read ConsoleMods wiki, it seems that I need a programmer. I have ordered rpi pico for this and will dive into it once I figure out the process.
With RGH3 you technically don’t absolutely need a flasher since you can technically flash from within the BadUpdate jailbreak, but a flasher is nice if you need to recover the nand if something goes wrong.
But you may want to consider just going the BadAvatar route. My soldering skills are above average after university but if you’re not used to SMD stuff you will struggle. BadAvatar takes less than a minute and will boot you into Aurora right after it finishes.
Its also worth noting that some later slims can’t be hardmodded at all so just look out for that. I would recommend the consolemods wiki and if you look on YouTube you’re bound to find some resources
I know things have changed since I last did an RGH setup, which is probably where the confusion comes from; things are changing even though the scene was most active 10+ years ago.
I imagine you don’t need a NAND flasher now that ABadAvatar exists, but I could be mistaken. The process used to be, at a really high level: solder the NAND flasher/dumper, dump the original NAND, solder the RGH timer, then flash a NAND with a good timing profile for that console.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: [email protected]
Welcome to the largest gaming community on Lemmy! Discussion for all kinds of games. Video games, tabletop games, card games etc.
Rules
1. Submissions have to be related to games
Video games, tabletop, or otherwise. Posts not related to games will be deleted.
This community is focused on games, of all kinds. Any news item or discussion should be related to gaming in some way.
2. No bigotry or harassment, be civil
No bigotry, hardline stance. Try not to get too heated when entering into a discussion or debate.
We are here to talk and discuss about one of our passions, not fight or be exposed to hate. Posts or responses that are hateful will be deleted to keep the atmosphere good. If repeatedly violated, not only will the comment be deleted but a ban will be handed out as well. We judge each case individually.
3. No excessive self-promotion
Try to keep it to 10% self-promotion / 90% other stuff in your post history.
This is to prevent people from posting for the sole purpose of promoting their own website or social media account.
4. Stay on-topic; no memes, funny videos, giveaways, reposts, or low-effort posts
This community is mostly for discussion and news. Remember to search for the thing you’re submitting before posting to see if it’s already been posted.
We want to keep the quality of posts high. Therefore, memes, funny videos, low-effort posts and reposts are not allowed. We prohibit giveaways because we cannot be sure that the person holding the giveaway will actually do what they promise.
5. Mark Spoilers and NSFW
Make sure to mark your stuff or it may be removed.
No one wants to be spoiled. Therefore, always mark spoilers. Similarly mark NSFW, in case anyone is browsing in a public space or at work.
6. No linking to piracy
Don’t share it here, there are other places to find it. Discussion of piracy is fine.
We don’t want us moderators or the admins of lemmy.world to get in trouble for linking to piracy. Therefore, any link to piracy will be removed. Discussion of it is of course allowed.
I possess soldering skills so that is no issue.
I been reading and things are confusing for me. Some say that I only need 2 wires to run across the motherboard and run ABadAvatar. But if I read ConsoleMods wiki, it seems that I need a programmer. I have ordered rpi pico for this and will dive into it once I figure out the process.
With RGH3 you technically don’t absolutely need a flasher since you can technically flash from within the BadUpdate jailbreak, but a flasher is nice if you need to recover the nand if something goes wrong.
But you may want to consider just going the BadAvatar route. My soldering skills are above average after university but if you’re not used to SMD stuff you will struggle. BadAvatar takes less than a minute and will boot you into Aurora right after it finishes.
Its also worth noting that some later slims can’t be hardmodded at all so just look out for that. I would recommend the consolemods wiki and if you look on YouTube you’re bound to find some resources
I know things have changed since I last did an RGH setup, which is probably where the confusion comes from; things are changing even though the scene was most active 10+ years ago.
I imagine you don’t need a NAND flasher now that ABadAvatar exists, but I could be mistaken. The process used to be, at a really high level: solder the NAND flasher/dumper, dump the original NAND, solder the RGH timer, then flash a NAND with a good timing profile for that console.