Russian modder VIK-on has built a DIY 32GB DDR5 desktop memory stick using salvaged laptop SO-DIMM chips VIK-on reached out to us to give an update on his
VIK-on reached out to us to give an update on his self-built DDR5 memory. According to the modder, the donor chips came from two 16GB SO-DIMM modules that cost 8,000 rubles each. A new PCB costs 50 yuan, which VIK-on estimates at about 600 rubles. A basic heatsink from AliExpress added another 415 rubles.
That puts the total build cost at 17,015 rubles, roughly $218, for a single 32GB stick. In comparison to DDR5 memory currently on the market in Russia, that’s at least 1/3 of the cost. The DDR4-4800 32GB memory costs 423 USD while 6400 CL32 memory costs 588 USD. A quick check in the US or EU, shows that such memory can easily cost much more than that.
No he didn’t. He swapped DDR5 memory on laptop SO-DIMMs onto desktop DIMMs. The article focuses on the form-factor of the source memory and the generation of the result. But the generation doesn’t change, and I assume that it is not possible. You can see the source memory here
While it’s a cool project and may be useful while laptop RAM is cheaper than desktop RAM, that state of affairs is unlikely to last that long, because the actual chips on the PCBs are the same.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: [email protected]
No game suggestions, friend requests, surveys, or begging.
No Let’s Plays, streams, highlight reels/montages, random videos or shorts.
No off-topic posts/comments, within reason.
Use the original source, no clickbait titles, no duplicates.
(Submissions should be from the original source if possible, unless from paywalled or non-english sources.
If the title is clickbait or lacks context you may lightly edit the title.)
No he didn’t. He swapped DDR5 memory on laptop SO-DIMMs onto desktop DIMMs. The article focuses on the form-factor of the source memory and the generation of the result. But the generation doesn’t change, and I assume that it is not possible. You can see the source memory here
While it’s a cool project and may be useful while laptop RAM is cheaper than desktop RAM, that state of affairs is unlikely to last that long, because the actual chips on the PCBs are the same.